How to Clean a Glass Weed Pipe?

Cleaning your glass weed pipe is one of the ways to keep it usable and tasty. Not many probably realize that a clean pipe is a factor that makes their smoking experience much better. 

Lotus Smoke and Gift is a store that values the care of your smoking implements among others. This blog gives you a step-to-step guide to the simple procedures of cleaning your glass pipe.

Why Cleaning Your Pipe is Important

Prior to talking about the cleaning, let's see why cleaning your pipe is necessary. Hash or cannabis residue usually builds up after smoking over a long time, which is why it impacts both the taste of the smoking and the airflow. Smoking from an unclean pipe may be a contributor to health problems. Cleaning on a regular basis will make a difference to your experience in both of the two ways: health and extending the life of the pipe.

What You'll Need

Before starting the cleaning process of your glass pipe, the following will be needed:

  • Rubbing alcohol (at least 70%)
  • Coarse salt (like kosher or sea salt)
  • A resealable plastic bag or container
  • Cotton swabs or pipe cleaners
  • Warm water
  • A bowl or dish for rinsing

Step-by-Step Cleaning Process

Step 1: Disassemble Your Pipe

If your glass pipe has removable parts, take them apart. Thus, you will be able to clean each part of it thoroughly. For pipes without detachable parts, you can still clean them as one unit.

Step 2: Rinse with Warm Water

First, turn on warm water and start washing the outer surface of your pipe with a strong water jet. This step will aid in the loosening of any leftover materials or dirt inside. Swirling the water around can help dislodge gunk before using stronger cleaning agents.

Step 3: Mix the Cleaning Solution

After that, pour coarse salt along with the rubbing alcohol into a resealable bag or container. The alcohol is a solvent and will dissolve the resin, while the salt removes the stubborn residue by abrasion. Be sure to add enough of both—something like a quarter cup of each should be enough.

Step 4: Clean the Pipe

Put the pipe inside a bag or container along with the cleaning solution. If you are using a bag, make sure to seal it tightly and then shake it vigorously for a minute or two. In this way, your pipe will have its all surfaces coated with the mixture and thus the built-up resin will be loosened. If you are using a container, move around the solution while ensuring that all the parts are submerged.

Step 5: Scrub the Pipe

After soaking it for 15 minutes, use cotton swabs or pipe cleaners to clean any remaining residue. Pay special attention to the areas around the bowl and the stem, since these are the places where most of the deposit can be found.

If you need high-quality glass pipes to replace your old ones, check out our collection at Lotus Smoke and Gift!

Step 6: Rinse Properly

After the tube has been cleaned, now rinse it well with warm water to get all the alcohol and salt off. Make sure, all parts are rinsed inside, and then shake off any extra water, so it can dry faster.

Step 7: Dry and then Use

Now, you may place the freshly cleaned pipe on a cloth or drying rack to dry thoroughly. Make sure that you don't use any paper towels as some fibers of the paper might stick on your glass. When it gets dry, your glass weed pipe will give you the chance to enjoy it with the clear and crisp cloud that has been made each time.

Conclusion

For smooth smoking of your weed pipe, clear is a thing that is of great importance but if people neglect it. Sticking to the methods provided in this manual, you will not only have better flavor and optimal airflow but also save your cherished pipe from frequent replacement. Lotus Smoke and Gift brings an array of chic glass pipes and they seriously deserve a treatment to such so they can be in good condition!

Read Our Latest Posts:

Back to blog